TOSHIBA UOC

SERVICE TOSHIBA UOC 8873 7E47

Service MODE

To enter in design mode: press vol-key untill volume is zerokeeping pressed vol-key on (Vol-key on key board) ; press display/rcl key on remote , Now (design) mode is open and we can scroll the service bit by P+ / P- key and value canbe changed  by Vol+ / Vol-

TOSHIBA

SERVICE MENU

TOSHIBA - 8893 (MONO-STR-250CH)

STEP NO :-1         PRESS MENU
STEP NO :-2         ENTER CODE:- 6483
STEP NO :-3         ENTER DISPLAY
STEP NO :-4         ENTER DISPLAY=AGAIN CHART PRESS MUTE BUTTON
---------------------------------------------------------------------------------------
                                                         CHART NO
                                                        
        F0                       F-1                                                 F-2
       RC= 80               H. PHASE= 11                              SUB. CONTRUST= 15
       GC=80                V.SIZE= 40                                   SUB.COLOUR= 0
       BC=80                V.POS= 0                                     SEC.COLOUR= 0
       GD=64               V.LIN= 20                                     ST3= 32
       BD=64               V.SC.= 10                                      ST4= 32
       SB=0                  H.BOW= 4                                    OSD.CONT= 3
       U.BLK=8           H.PARA= 4                                   OSD.H.POSI=33
       V.BLK=8           H.BLK-LEFT= 0                           OSD.V.POSI= 1
                                 H.BLK-RIGHT= 0

Service Code : Videocone CTV

Service Mode : Videocone CTVFor open service mode, once short 2tags(jumpers) near comand ic (system ic ormicroprosser ic) in printed line box of main bord and appears six boxes. Fillup this boxes by password and it is very sensitive. Pasword: 991220 / 200528. Another oparetion solve by R/C. In case of another models need a master R/C. Which is supplys by Company and for some sets, use hidden key of R/C
======
Service Menu (VIDEOCON /SANSUI/HONDAI/AKAI): Colour TV
There are certain features of CTV which can be accessed & adjusted to optimal level by entering into service menu. To enter into the specific mode, we have to press a SERVICE KEY (S) followed by numeric key of remote handset. Example: Service key (S) followed by numeric key. 1>service Mode. 2>Design Mode. 3>Shipping Mode. 4>Manufacturing Mode..
Service Mode: [VIDEOCONE/SANSUI/HONDAI/AKAI]:
After entering in this mode all Chroma related parameters can be controlled. The parameters explained below can be selected by pressing "CHANNEL UP" and "CHANNEL DOWN" key and adjustment of selected parameter to get best performance, the step value can be increased or decreased by "VOLUME HIGH" & "VOLUME LOW" keys
For Latest Models
Menu>1147
Menu>0323
VOL- , (Local Key,Vol=0) & Display (R/C)

HOW TO ENTER SERVICE MODE TO VIDEOCON 3634R _ 5443R _ 5134R [CHALLENGER]

To enter service mode:

Short contact the service key [Hidden] on the remote.

The screen display "Service".
Press digit (1) to enter into service mode.
Press digit (2) to enter into Design Mode.
Press digit (3) to enter to factory settings.
Press digit (4) to enter into Manufacturing Mode. [This mode is used rarely]

To call an item to adjust, use "UP" & "DOWN" keys on the remote control.
To adjust the data value to selected item, use Vol+ & Vol (-) keys on the remote control.
To exit from service mode, short contact the Hidden Service Key again.

To access the [Hidden] key, just peel out the front sticker on the bottom side of the remote control.  You can see the hidden control hole there.  Won't be a button, but a hole.  Using the head of a small nail, you can short circuit the carbon contacts inside the remote control board.  This one touch will activate the service mode.

Latest single chip models
Entering into service mode
To enter into service mode press hidden [Service] key at the bottom right corner of the remote handset, following display will appear on screen.

** Press key [1] on remote to enter into Service Mode.
** Press key [2] on remote to go into Design Mode
** Press key [5] to get various "Test Patterns" .
Service Mode Keys
** The parameters explained below can be selected by pressing [Channel Up] and [Channel Down] keys.
** Adjustment of selected parameter can be done by [Volume UP/DOWN] keys.
Cancellation of Service Mode
Press the [SERVICE] key once again, or switched off/on the TV set.

Descriptions of some important Service Parameters 
AGC-"33" (0~63)
Vertical Amplitude (VA)-"18" (0~63)
Vertical Shift (VSH)- "0~7
Horizontal Shift (HSH) -"17" (0~31)
OSDH-"13" (0~31)
OSDV- "18" (0~31)

TCL TV

Remote Service Code of TCL Colour TV
-¤-
Old Model
VOL- DISPLAY by R/C
New Model
VOL- > --/- > SLEEP by R/C
or,

TCL M5262 TV mode service

CHASIS Using M5262 IC, PRESS MENU BUTTON THEN

 

INPUT the nimber is 6,4,8,3

change value press volume -/+ or select item press 

program -/+

TCL T2111A TV mode service

Colour Television Receiver Model:T2111A

Simultaneously press “DISPLAY” button on remote

 handset and Volume- button on

                                     or,

for entering into service,power on the T.V. set & set the 

volume to zero then press channel zero on remote

 handset for at once,keep it press for 10 to 15 seconds. 

service mode will activated.

SONY TV

Service Code:By Remote Control: STANDBY-DISPLAY-5-VOL+ -STANDBY(Withen 5 sec.). Select by:1&4 Control by:3&6 Store:MUTE-0

SALORA TV

Service Code:
Model:5301 By Remote Control: DISPLAY=MUTE=SLEEP=FUSSY=DISPLAY Select By CH+/- & Control By VOL+/- as Display. For New Model: 2-MUTE-DISPLAY-SLEEP-MUTE Control as Same. Latest Model: DISPLAY MUTE SLEEP FUZZY Control as Same.
***
Salora Colour Television
Models: SC3630, SC3640, SC3642, SC2025, SC2051, SC2133, PC2142
For Entering Into Service Mode:
* There are 4 hidden service keys inside remote control handset, Short the contacts of hidden service Keys respectively.
===
Salora Colour Television Chassis: 2B-F/EUROSTEREO-1
Models : 28NBS/DIGIVISION 63.2, 71.2, 2'M6
For Entering Into Service Mode:
* Press the Remote control keys in the following sequence within 1 second -/- > MENU > TV
***
SALORA Colour Television Chassis: STEREO PLUS, Models: 17/21SF, 25/28X71, 25/28SP50
For entering into Service Mode
* Press the Remote control keys in the following sequence. MUTE>OK>(M)>TV
* Controls: CURSOR buttons
* Store: OK (M)
* Exit: TV

PANASONIC TV

Service Code: PANASONIC Colour TV Chassis : MX-5, Model: TC-14S80RZ
For entering into Service Mode:
* Set 30 minutes by pressing the "TIMER" button on the remote handset.
* Now Simultaneously press "RECALL" button on remote handset and "VOL-"button on the front panel of TV.
**
Panasonic Colour TV Chassis: MX-3, MX-3C
Models: TS-2150T, TS-2150TS, TC-14S10M, TC-14S10A
For entering into Service Mode :
* Simultaneously press "RECALL" ON REMOTE AND "VOLUME-" on local panel.
* To exit: Press "NORMAL" ON Remote control
To set Hotel Mode "ON" & "OFF" :
* Press simultaneously "OFF TIMER" on remote control and "CH UP" ON Local key board.
* Press simultaneously "OFF TIMER" on remote control and "VOL-" ON Local key board.
**
PANASONIC/NATIONAL Colour Television Chassis: EURO-1
For Entering Into Service Mode:
* In sound-Menu Low-tone-regal to MAX AND High-tone-regal to MIN. Press
* "VOLUME-" on TV and "RESET" on Remote control in some time.
* For Selection: "RED" and "GREEN" buttons.
* For Adjustment: "YELLOW" and "BLUE" buttons.
* For Store: "STORE"
To Exit: Switch Off.
***
Panasonic/National Colour TV Chassis : EURO-2
For Entering Into Service Mode:
* In Sound-Menu Low-Tone-regel to MAX and High-tone-regel to MIN, Press "Volume-" on TV and "REVEAL" on remote control in some time.
* For Selection: "RED" and "GREEN" buttons
* For Adjustment: "YELLOW" and "BLUE" buttons
* For Store: "STORE"
* To Exit: Switch Off

PHILIPS TV

Service Code:
Press following keys on hand set: 0 6 2 5 9 6 OSD/STATUS/MENU . Select and change by cursor UP/DOWN & LEFT/RIGHT
Model-21PT1423/94R
 OPTION --1> 128
OPTION --2> 215
OPTION --3> 65
OPTION --4> 0 (Sound problem)
OPTION --5> 192
OPTION --6> 128
OPTION --7> 0  

ONIDA TV

Service Code:

Model: 21XSW4 Series: Press "VSM" and "+" On remote control. Model: CANDY "VSM" and "DISP" Select and change by CH/VOL

LG/GOLDSTER

LG/GOLDSTER Colour Television Model: MC64, MC84
For entering into Service Node:
* Simultaneous press "OK" on remove control & local keyboard panel.

BPL TV

Service Code:Press simultaneously "MENU" key on TV panel and "FUNCTION" key on Remote control . Select and controls By Channel Volume UP/DOWN

AKAI TV

Service Code:
Old Model: Pushing Local CH+&- , Set On By Main Switch. Control by R/C CH+/- & VOL+/-

China Kit/Panorama/Others, using IC- LC86532C-57S

China Kit/Panorama/Others, using IC- LC86532C-57S
***
-:ADJUSTMENT MANUEL;-
===
How to enter into "FACTORY" mode?
1) First of all, press "ALT" button on the Remote control.
2) Press "V-" button on the chassis, make the volume to "00" (Do not loosen press "V-" button now!)
3) Press "ALT" button on the Remote control again.
4) "FACTORY" Logo appear on the screen if the above operation correct.
5) Repeat above operation, it will enter into "B/W BALANCE"
6) Repeat above operation, it will enter into "ADJUST MENU"
7) Under "ADJUST MENU" mode, press "P+/P-" button on the Remote control to select items, Press"V+/V-" button to change the data.
8) Under "ADJUST MENU" mode, press "MUTE" button on the Remote control to page up, Press"ZOOM" button to page down.
9) Power off to exit "FACTORY" mode.
----
How to enter into LOGO setting?
1) Enter into "FACTORY" mode first.
2) Press "V-" button on the Remote control and make the volume to "00" (Do not loosen press "8-" button mow!)
3) Press "P-" button on the Remote control now then you can set your logo.
4) Press "V-/V+" button to select the word. Press "PP" button move to next word.
5) Press "RECALL" button to exit LOGO setting.
***
S-BRI>37, R BIA-68, G BIA-78, B BIA-73, R DRV-72, G DRV-7, B DRV-67, *C.B/W-0, RF AGC-33

UOS/Philips

Service Menu Chart Of UOC Local PHX chasis, Using Single Chip
:::::::::::::::MENU-1147 by R/C,....

UOC DEMO VA 1- 1, INIT TV- 0, AG- 32, HSH- 32, VS- 32, VA- 32, VSH- 32, SC- 17, BLR- 38, BLG- 36, WPR-C- 20, WPG-C- 32,WPB-C- 35, WPR-N- 32, WPG-N- 32, WPB-N- 32, WPR-W- 35, WPG-W- 32, WPB-W- 20, ZOOM- 40, WIDE- 20

HAIER TV

For Old Model :-
Volume - (Body) & Display (R/C), Simelteniously
(Control by Ch & vol)

New Model
Volume - > Menu > 6483 (this operation will made 3 times) by (R/C)