China Kit/Panorama/Others, using IC- LC86532C-57S
***
-:ADJUSTMENT MANUEL;-
===
How to enter into "FACTORY" mode?
1) First of all, press "ALT" button on the Remote control.
2) Press "V-" button on the chassis, make the volume to "00" (Do not loosen press "V-" button now!)
3) Press "ALT" button on the Remote control again.
4) "FACTORY" Logo appear on the screen if the above operation correct.
5) Repeat above operation, it will enter into "B/W BALANCE"
6) Repeat above operation, it will enter into "ADJUST MENU"
7) Under "ADJUST MENU" mode, press "P+/P-" button on the Remote control to select items, Press"V+/V-" button to change the data.
8) Under "ADJUST MENU" mode, press "MUTE" button on the Remote control to page up, Press"ZOOM" button to page down.
9) Power off to exit "FACTORY" mode.
----
How to enter into LOGO setting?
1) Enter into "FACTORY" mode first.
2) Press "V-" button on the Remote control and make the volume to "00" (Do not loosen press "8-" button mow!)
3) Press "P-" button on the Remote control now then you can set your logo.
4) Press "V-/V+" button to select the word. Press "PP" button move to next word.
5) Press "RECALL" button to exit LOGO setting.
***
S-BRI>37, R BIA-68, G BIA-78, B BIA-73, R DRV-72, G DRV-7, B DRV-67, *C.B/W-0, RF AGC-33
***
-:ADJUSTMENT MANUEL;-
===
How to enter into "FACTORY" mode?
1) First of all, press "ALT" button on the Remote control.
2) Press "V-" button on the chassis, make the volume to "00" (Do not loosen press "V-" button now!)
3) Press "ALT" button on the Remote control again.
4) "FACTORY" Logo appear on the screen if the above operation correct.
5) Repeat above operation, it will enter into "B/W BALANCE"
6) Repeat above operation, it will enter into "ADJUST MENU"
7) Under "ADJUST MENU" mode, press "P+/P-" button on the Remote control to select items, Press"V+/V-" button to change the data.
8) Under "ADJUST MENU" mode, press "MUTE" button on the Remote control to page up, Press"ZOOM" button to page down.
9) Power off to exit "FACTORY" mode.
----
How to enter into LOGO setting?
1) Enter into "FACTORY" mode first.
2) Press "V-" button on the Remote control and make the volume to "00" (Do not loosen press "8-" button mow!)
3) Press "P-" button on the Remote control now then you can set your logo.
4) Press "V-/V+" button to select the word. Press "PP" button move to next word.
5) Press "RECALL" button to exit LOGO setting.
***
S-BRI>37, R BIA-68, G BIA-78, B BIA-73, R DRV-72, G DRV-7, B DRV-67, *C.B/W-0, RF AGC-33
My customer tv got locked, It's china kit. And it is showing the lock icon.HOW TO UNLOCK IT.
ReplyDeleteYou can try by R/C...like as child lock or other lock(If applicable in your TV) ; or change EPRROM/MEMORY Ic
DeleteThis comment has been removed by the author.
ReplyDeleteonida tv sound problem
ReplyDeletewhen press vol up just disply vol level 1 only no growth
plz help
D/Try to replace EPROM /MEMORY IC
DeleteScod menu 6469to remot
ReplyDeleteVidiocon 8823 serves cods vol- to 0 or remote to disply
ReplyDeleteImark Samsung LG LED LCD TV Repair service centre in Hyderabad
ReplyDelete
ReplyDeleteUsing ic 8873cpcng7c75& using remote t3
Sarvice menu code
My customer tv got locked, It's china kit. And it is showing the lock icon.HOW TO UNLOCK IT.
ReplyDeletethank you very mach
ReplyDeleteI ask for supra
ReplyDelete8873cpcng7c75 service code
ReplyDeletePanoroma tv service mode kiya hy
ReplyDeleteSir,I have paronama kabuki tv 34",now I awnat chenge mother bord,help me with right information,
ReplyDelete